| W13-38P1 Rotek Slewing Ring Bearings | h1:53,98 mm; Bearing number:SIZP12N; C1:12,7 mm; Thread (G) - 1/2-20:1/220; r min.:0,6 mm; l5:6,35 mm; Basic dynamic load rating (C):19,9 kN; d3:18,67 mm; d2:33,32 mm; Angle:9 °; l4 max.:70,64 mm; dk:23,81 mm; d4:22,23 mm; l3 min.:30,15 mm; W:19,05 mm; B:15,88 mm; l7 min.:16,2 mm; Bore Diameter (mm):12,7; Weight:0,133 Kg; d:12,7 mm; |
| A10-22E5A Rotek Slewing Ring Bearings | Width (mm):18; d:60 mm; B:18 mm; r:1.1 mm; Outer Diameter (mm):95; Bore Diameter (mm):60; Size (mm):60x95x18; D:95 mm; C:18 mm; Bearing number:3NC 7012 FT; |
| M5-36P1Z Rotek Slewing Ring Bearings | Limiting Speed - Grease:4,300 rpm; da (min):111 mm; r1:0.5 mm; D1 (max):142.6 mm; Static Load Rating:42,000 N; Weight:0.803 kg; Enclosure:Single Shield with S; a (max):3.3 mm; Configuration:Single Row; Radial Clearance:0.036 to 0.066 mm; Snap Ring Outside Diameter:150.7 mm; Limiting Speed - Oil:5,300 rpm; Bore Type:Cylindrical Bore; Cy (max):4.7 mm; B:20 mm; Da (max):139 mm; Factor fo:16.4; Snap Ring Width:1.7 mm; |
| L6-37E9ZD Rotek Slewing Ring Bearings | Bearing Length, Nominal (B):10.000; Wall Thickness (S3):1.000; Shaft Dia., Nominal (d):18.0000; ID Chamfer Length (Ci):0.300; Housing Bore Dia. (Dh) - 20 +0.021 / -0:20 +0.021 / 0; Bearing Type:straight; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Bore after Mounting (di) - 18 +0.043 / -0:18 +0.043 / 0; OD Chamfer Length (Co):0.600; Outer Diameter (mm):20; ID Chamfer Angle (B deg.):35; |
| L6-29E9ZD Rotek Slewing Ring Bearings | Bearing number:7302BDT; r min.:1 mm; Angle (α):40 °; Basic dynamic load rating (C):20,3 kN; C:13 mm; Bore Diameter (mm):15; Width (mm):13; (Grease) Lubrication Speed:13000 r/min; Outer Diameter (mm):42; Size (mm):15x42x13; d:15 mm; B:13 mm; 2B:26 mm; Basic static load rating (C0):13,3 kN; Weight:0,114 Kg; D:42 mm; |
| L6-29N9Z Rotek Slewing Ring Bearings | nG:3350 1/min / Limitin; m:10,9 kg / Weight; d2G:M140X2; Da max:216 mm; nB:2550 1/min / Referen; Outer Diameter (mm):230; Cr:760000 N; da min:144 mm; D:230 mm; d1H:125 mm; D1:205 mm; Y0:2,56; d:130 mm; Size (mm):125x230x64; e:0,26; b:12 mm; Bearing number:22226-E1-K + AHX3126; ds:6,3 mm; Y1:2,62; ns:12,2 mm; |
| L6-16P9ZD Rotek Slewing Ring Bearings | Outer Diameter (mm):310; Basic dynamic load rating (C):615 kN; C:51 mm; Bearing number:NU1040; B:51 mm; Basic static load rating (C0):408 kN; Size (mm):200x310x51; D:310 mm; d:200 mm; Bore Diameter (mm):200; Weight:14,3 Kg; Width (mm):51; (Grease) Lubrication Speed:1400 r/min; Fw:229 mm; |
| A10-43N28D Rotek Slewing Ring Bearings | E Min.:22.5000 in; E:23.7500 in; E Max.:25.0000 in; Adapter Assembly Number1:SNW-134 x 6.000; D:3.3750 in; Bearing Number:22334K; Triple Seal 2 Req’d:LOR 141; Full Timken Part Number:SAF226346; Bolt Hole Length:2.5 in; H:17.1875 in; B:29.5000 in; A:8.2500 in; Diameter S-1:6 in; Seal Type:Triple Ring Seal; Assembly Weight:485.000 lb; Bolt Hole Width:1.250 in; F:5 in; Housing Only2:SAF634 x 6.000; |
| A16-79P1A Rotek Slewing Ring Bearings | G1 - Heat Generation Factor (Roller-Raceway)10:39.5; D1 - Flange Outer Diameter:3.6215 in; Da - Cup Frontface Backing Diameter:3.27 in; T1 - Bearing Width:1.188 in; Cup Part Number:3525-B; G2 - Heat Generation Factor (Rib-Roller End):10.5; Ab - Cage-Cone Frontface Clearance:0.05 in; da - Cone Frontface Backing Diameter:1.89 in; d:1.6250 in; a - Effective Center Location3:-0.4 in; Y - ISO Factor9:1.96; |
| A4-23P2A Rotek Slewing Ring Bearings | Bearing number:GNE50KRRB; Outer Diameter (mm):110; Bore Diameter (mm):50; D:110 mm; d:50 mm; Size (mm):50x110x66.7; Width (mm):66,7; |
| A12-48E12 Rotek Slewing Ring Bearings | Bearing number:87504; T:15,875 mm; Width (mm):15,875; d:20 mm; C:14 mm; Outer Diameter (mm):47; Size (mm):20x47x15.875; D:47 mm; Bore Diameter (mm):20; B:15,24 mm; |
| M5-26P1Z Rotek Slewing Ring Bearings | Outer Diameter (mm):90; Weight:0.384 Kg; Manufacturer Name:NACHI; ra max.:1.0 mm; Size (mm):55x90x18; (Grease) Lubrication Speed:7500 r/min; Internal Clearance:C0-Medium; Inventory:0.0; r min.:1.1 mm; d:55 mm; Inch - Metric:Metric; Bearing number:6011ZE; Harmonized Tariff Code:8482.10.50.68; Enclosure:1 Metal Shield; Rolling Element:Ball Bearing; B:18 mm; Precision Class:ABEC 1 | ISO P0; Snap Ring:No; |