| H7-43N1 Rotek Slewing Ring Bearings | B2:69 mm; Width:73 mm; T:73 mm; Bearing number:29268E; D:460 mm; Configuration:Single Row; D1:395 mm; Outer Diameter (mm):460; Bore Size:340 mm; Width (mm):73; B1:21 mm; ra (max):2.5 mm; B:21 mm; Enclosure:Open; Fillet Radius/Chamfer:3 mm; d1:445 mm; Weight:34.5 Kg; da min.:395 mm; A:183 mm; Size (mm):340x460x73; |
| A16-56N5 Rotek Slewing Ring Bearings | Fw:46,2 mm; Basic static load rating (C0):101 kN; Bearing number:NU2307 E; Size (mm):35x80x31; Width (mm):31; C:31 mm; Basic dynamic load rating (C):93,1 kN; Outer Diameter (mm):80; d:35 mm; Weight:0,729 Kg; Bore Diameter (mm):35; B:31 mm; (Grease) Lubrication Speed:6900 r/min; D:80 mm; |
| M5-22P1 Rotek Slewing Ring Bearings | Designation SX:CX105; Designation Ruville:6611; Designation SKF:VKBA 1336; Designation FAG:713640170; Bearing number:R166.11; |
| L4-17P9Z Rotek Slewing Ring Bearings | ra max.:1 mm; da min.:96 mm; Grease lub.:1800; d1(max):110; D2(min):-; D3(min):-; d1:110 mm; Da max.:89 mm; Outer Diameter (mm):110; da(min):96; Bore Diameter (mm):75; T1:28,3 mm; Basic dynamic load rating (C):77,4 kN; T:28.3; Bearing number:53215; Oil lub.:2700; (Refer.)Mass(kg):0.850; Bearing No.:53215; Ca:96.7; C:-; |
| M5-40P1Z Rotek Slewing Ring Bearings | Basic static load rating (C0):6,95 kN; Outer Diameter (mm):68; (Grease) Lubrication Speed:29 000 r/min; r3 min.:0,3 mm; Width (mm):12; r4 min.:0,3 mm; dh:8,4 mm; D1:60,3 mm; Bore Diameter (mm):45; Basic dynamic load rating (C):10,1 kN; (Oil) Lubrication Speed:44 000 r/min; ra max.:0,6 mm; da min.:43,2 mm; Bearing number:VEB 45 7CE1; C:12 mm; Size (mm):45x68x12; a:14 mm; db min:43,2 mm; Da max.:64,8 mm; |
| R8-30E3 Rotek Slewing Ring Bearings | r min.:2 mm; db(min):89; D:140 mm; Cu:35.8; Oil lub.:5300; d1:-; Ew:-; r1(min):2; Db(max):-; Outer Diameter (mm):140; B2:-; Basic static load rating (C0):243 kN; dd(min):-; C0r:243; Bore Diameter (mm):80; (Refer.)Mass(kg):2.07; rb(max):2; B1:-; Da(max):131; B:33 mm; |
| RKS.161.16.1314 SKF Slewing Ring Bearings | B - Cone Width:1.4375 in; Cone Part Number:HM813840; db - Cone Backface Backing Diameter:3.07 in; Aa - Cage-Cone Backface Clearance:0.14 in; K - Factor8:1.16; R - Cone Backface To Clear Radius3:0.14 in; C1 - Dynamic Radial Rating (1 million revolutions)6:51500 lbf; Cg - Geometry Factor:0.125; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:11500 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:23300 lbf; |
| A16-78E4 Rotek Slewing Ring Bearings | Cr:11.9; B:12.7 mm; Bore Diameter (mm):228,6; r(min):0.4; Weight:0,535 Kg; r:0,4 mm; Basic dynamic load rating (C):11,9 kN; C:12.7 mm; Bearing number:KUX090 2RD; D:247,65 mm; C0r:22.2; Bearing No.:KUX090 2RD; Outer Diameter (mm):247,65; Width (mm):12.7; Mass(kg):0.535; d:228,6 mm; Size (mm):228.6x247.65x12.7; |
| A8-39E12 Rotek Slewing Ring Bearings | Characteristic outer ring frequency, BPF0:13.8 Hz; Characteristic inner ring frequency, BPFI:16.2 Hz; Angle (α):15 °; D2:75.31 mm; Axial rigidity:50 N/µm; db min:60.5 mm; r1a max:0.3 mm; Nlim (grease):24,000 rpm; Fatigue limit load, Cu:0.41 kN; B:13 mm; Characteristic cage frequency, FTF:0.46 Hz; Outer Diameter (mm):80; Min operating temperature, Tmin:-30 °C; Max operating temperature, Tmax:120 °C; |
| A13-22P4 Rotek Slewing Ring Bearings | H2:41.275 mm; J - max.:225.425 mm; d2:101.6 mm; L:266.7 mm; A:88.9 mm; J1:47.625 mm; Limiting speed:1100 r/min; S:0.794 mm; B:85.725 mm; H1:69.85 mm; Width (mm):88,9; A1:99.219 mm; Basic dynamic load rating C:147 kN; da:63.5 mm; s:31.75 mm; Bearing number:FSYE 2 1/2-3; |
| R8-52N3 Rotek Slewing Ring Bearings | K - Factor2:1.74; Db - Cup Backface Backing Diameter:87.12 mm; Series:M207000; G2 - Heat Generation Factor (Rib-Roller End):19.9; Cg - Geometry Factor:0.0937; Y - ISO Factor4:1.79; r - Cup Backface To Clear Radius1:2.03 mm; G1 - Heat Generation Factor (Roller-Raceway):56.4; D:95.000 mm; e - ISO Factor3:0.33; Da - Cup Frontface Backing Diameter:91.90 mm; Cup Part Number:JM207010A; Design Units:METRIC; |
| H8-54N1 Rotek Slewing Ring Bearings | Da - Cup Frontface Backing Diameter:48.01 mm; Db - Cup Backface Backing Diameter:43.94 mm; K - Factor2:1.95; C - Cup Width:18.000 mm; Design Units:METRIC; e - ISO Factor3:0.3; Cg - Geometry Factor:0.0512; r - Cup Backface To Clear Radius1:1.52 mm; G2 - Heat Generation Factor (Rib-Roller End):5.9; Series:32304M; Cup Part Number:Y32304M; D:52.000 mm; Y - ISO Factor4:2; G1 - Heat Generation Factor (Roller-Raceway):10.3; |